EasyManua.ls Logo

Be Cool BC90LEF2202 - Page 24

Be Cool BC90LEF2202
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISCH
24
29. When inserting the drip hose, always make sure to press it firmly into
the dehumidifier.
30. The operating temperature is between 5°C and 32°C.
31. PLEASE NOTE The dehumidifier has an automatic defrost function. If
frost forms on the evaporator coil, the compressor switches off
automatically, but the cooler continues to run until the frost dissipates.
When the coil is completely thawed, the compressor starts
automatically and dehumidification continues.
32. Unplug the appliance when not in use.
33. Always switch off the appliance before unplugging it from the mains.
34. Do not pull the power cord to disconnect the appliance from the mains.
Always pull the plug to unplug the mains cable.
35. Do not handle the plug with wet hands to avoid electric shock.
36. Store the appliance vertically in a safe, dry place out of reach of
children when not in use and do not cover the appliance with plastic
packaging.
37. Keep the appliance in good condition by maintaining and cleaning the
appliance. If you have any questions about maintenance, you can
contact the customer hotline/service centre authorised by the
manufacturer.
38. Do not use insecticide sprays or other flammable substances near the
unit.
39. Do not scratch the exterior of the appliance with sharp objects. 40.
40. Do not spray oil or water into the unit. Do not clean the unit with water,
but only wipe it with a soft, semi-moist cloth.
41. Do not wipe the machine with chemical solvents such as benzene,
petrol, alcohol, etc. If the machine is very dirty, use a neutral cleaner.
42. Do not turn the machine upside down.
SPECIFIC INFORMATION ON REFRIGERANT R290
1. R290 is a refrigerant according to the EC environmental guidelines.
2. The refrigerant is odorless.
3. The appliance should be installed in a room where there are no ignition
sources in operation (e.g.: open fire, gas and electrical appliances in
operation with open heat source)
4. Do not perforate or burn the air conditioner.
5. Make sure that the cooling circuit is not drilled.