ENGLISCH
31
• MODE-Button:
In the turn-on state or in the timed state, you can use this key to select
between the automatic dehumidification and continuous
dehumidification operating modes.
• Child lock:
Press and hold the MODE button for 3 seconds to activate the key lock.
Hold this button again for 3 seconds to unlock.
• TIMER-Button:
Press this button to enter the timer function.
Start the water pump drainage function aufter continuous pressing for
3 sec.
• FAN-Button:
Press this button to change the fan speed, you can choose between a
high or low speed.
• UP/DOWN-Button:
In the automatic dehumidification mode, you can set the humidity with
the UP/DOWN key. The setting range for the humidity is 30-80%.
3. FUNCTIONAL DESCRIPTION
Setting for automatic switching off
While the device is running, press the TIMER-Button to enter the timer setting.
With the timer-button you can set the time from 0 to 24 hours, each time you
press it, the set time increases by 1 hour. If the timer button does not move
within 5 seconds, it means that the time is confirmed. Once the set time has
elapsed, the device automatically turns off.
Settings for automatic switch on
In the standby state of the device, press the timer key to enter the timer
setting. Set the desired time with the timer button in the same way as when
the timer is turned off. If the timer button does not trigger any action within 5
seconds after completing
the setting, it means that the time is confirmed.
Automatic dehumidification mode
To Next Page
Loading...