E
18
FILLING THE WATER TANK
1. Please check first on the back of the appliance whether the rubber plug is firmly inserted
in the water outlet and closes it so that the water tank cannot accidentally leak out.
2. Fill the water tank on the top of the appliance. Open the cover on the top of the unit and
pour in clean water, checking the level on the front of the water tank:
MIN-mark:
The water tank must be filled to above the MIN mark so that the pump can function
properly
MAX-mark:
The water tank must not be filled over the MAX mark, otherwise water could enter the
inside of the appliance and thus damage electronic parts.
3. Make sure the water tank is not damp or wet on the outside, and if so, wipe it dry.
4. Close the cover again.
To Next Page
Loading...
