Need help?Do you have a question about the BE QUIET! Dark Power Pro 11 1200W and is the answer not in the manual?
80PLUS Platinum certification, minimal standby power consumption, and energy-saving requirements.
Features a 135mm SilentWings 3 fan for quiet operation with optimized airflow and fluid-dynamic bearing.
Supports overclocking with four 12V-rails, manual switchover, and high-quality 105°C capacitors.
Enables permanent or on-demand switching between 12V-rails for overclocking functionality via jumper or switch.
Modular cable management, sleeved cables up to 120cm, and 20/24-pin main connector for compatibility.
Monitors and controls case fans via the 'FAN' connection for optimized cooling based on internal temperatures.
Features multiple safety protections (OCP, OVP, UVP, OPP, OTP, SCP) and is certified to international safety standards.
Switches off the power supply if the load on individual circuits exceeds the specified limit.
Switches off the power supply if the voltage on circuits drops below a certain limit.
Deactivates the power supply if the voltage in the circuits is too high.
Prevents physical defects in the power supply and connected components via a fuse.
Automatically switches off the power supply if excessive heat builds up, requiring cooldown.
Triggers if the total output exceeds the specified maximum load, indicating an undersized PSU.
This non-transferable warranty applies to newly purchased, unopened products from the original consumer purchaser.
Parts and labor are warranted for the applicable period from the date of purchase, varying by model.
Lists items not covered by warranty, including wear and tear, unauthorized modifications, and accidental damage.
Limits be quiet!'s liability to repair/replacement, excluding incidental or consequential damages.
States there are no other warranties, expressed or implied, beyond the specified warranty length.
Explains that warranty grants specific legal rights which may vary by local law.
Clarifies that no employee or agent is authorized to modify this warranty.
Instructs users to check the owner's manual or website for support and requires proof of purchase.
Presents technical specifications and ratings for different Dark Power Pro 11 models based on AC input and DC output.
Details voltage tolerances and maximum ripple/noise levels for each DC output rail.
Specifies the recommended environment for operation and storage, including temperature and humidity.
Lists the minimum load requirements for each DC output rail to ensure stable operation.
Illustrates how the 12V rails are split and assigned to different connectors like SATA, HDD, FDD, and CPU.
Provides diagrams showing optimal PCI-E slot configurations for single and dual GPU setups.
Shows the physical dimensions of the power supply unit for different models (1200W/1000W/850W vs. 750W/650W/550W).
Details the pin assignments for the 24-PIN ATX power connector, including color and signal.
Details the pin assignments for the +12V power connector, including color and signal.
Details the pin assignments for the PCI express VGA connector, including color and signal.
Details the pin assignments for the SATA power connector, including color and signal.
Details the pin assignments for peripheral and FDD power connectors, including color and signal.
General| Power Output | 1200W |
|---|---|
| Efficiency | 80 PLUS Platinum |
| Modular | Full Modular |
| Cooling | 135mm Silent Wings 3 Fan |
| Dimensions | 193 x 150 x 86 mm |
| Protection | OCP, OVP, UVP, SCP, OTP, OPP |
| Warranty | 5 Years |
| Form Factor | ATX |
| Efficiency Percentage | Up to 94% |
| Lifespan | 100, 000 hours |
| Fan Bearing | Fluid Dynamic Bearing |
| PCIe Connectors | 8x PCIe 6+2-pin |
| SATA Connectors | 12 |
| Molex Connectors | 4 |
| EPS Connectors | 2 |
| ATX Connector | 1x ATX 20+4-pin |
| Operating Temperature | Up to 40°C |
| Topology | Full Bridge + LLC + SR + DC-DC |
To Next Page