Skip to content
Manuals+
User Manuals Simplified.
Home » bequiet » bequiet Straight Power 11 Platinum User Manual
bequiet Straight Power 11 Platinum User Manual
Straight Power 11
Platinum
USER MANUAL
1200W
1000W
850W
750W
650W
550W
2
1. INTRODUCTION
We are delighted that you have chosen to use a be quiet! power supply from our Straight Power 11 Platinum series
in your PC Please read and follow all the information contained in these instructions carefully prior to installation
Should you have any further question, please contact our customer service See contact information in item
Manufacturer’s details.
2. SAFETY INSTRUCTIONS
The power supply is only guaranteed to function properly if the instructions are followed.
Caution: Only use the supplied cable set. Using cables that were not included (e.g. cables of older power supply unit
series) may lead to defects!
Never open the power supply case. The electronic components inside the case generate a high voltage that is
dangerous to humans. Even after disconnecting the power supply from the network, some parts still have high
voltages. For this reason, a power supply adapter should only be opened by an authorised technician.
Opening the device voids your warranty.
Never handle the power supply with wet or damp hands when in operation.
Never insert objects into the power supply’s apertures/fans.
Note that the power supply is designed for use indoors in conditions without high levels of moisture in the
ambient air. Using the power supply outdoors will lead to serious damage.
To Next Page
Need help?
General
