EasyManua.ls Logo

BE QUIET! PURE POWER 11 - User Manual

BE QUIET! PURE POWER 11
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
USER MANUAL
700W
600W
500W
400W
350W
300W

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the BE QUIET! PURE POWER 11 and is the answer not in the manual?

Summary

Safety Instructions

Compatibility

Installing Your New Power Supply

Safety Functions

OCP (Over Current Protection)

Protects against excessive load by automatically switching off the power supply.

UVP (Undervoltage Protection)

Switches off the power supply if circuit voltage drops below a safe limit.

OVP (Overvoltage Protection)

Deactivates the power supply if circuit voltage exceeds the safe limit.

SCP (Short Circuit Safeguard)

Protects power supply and components from physical defects caused by short circuits.

Troubleshooting

Frequent Problems

Warranty

Technical Support and Warranty Service

Technical Data

Voltage Regulation

Distribution and Pin Assignment

Connectivity and Cable Lengths

BE QUIET! PURE POWER 11 Specifications

General IconGeneral
Efficiency90.6 %
Total power700 W
Power factor0.99
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power protection featuresOver current, Over power, Over voltage, Short circuit, Under voltage
Power Factor Correction (PFC) typeActive
PurposePC
Noise level- dB
80 PLUS certification80 PLUS Gold
Mean time between failures (MTBF)100000 h
Power supply unit (PSU) form factorATX
Product colorBlack
Cabling typeNon-Modular
CPU P4 connector (4-pin)3
Motherboard power connector20+4 pin ATX
EPS power connector (4+4 pin)Yes
PCI Express power connectors (6+2 pin)4
Peripheral (Molex) power connectors (4-pin)-
Sustainability certificatesRoHS, ENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth86 mm
Width150 mm
Weight2110 g

Related product manuals