BE 4.75HP - Using the Chemical Injector; Chemical Injector Operations

FOR SERVICE: 1-866-850-6662 & WWW.BEPRESSURE.COM
8
9
FOR SERVICE: 1-866-850-6662 & WWW.BEPRESSURE.COM
i
USING THE CHEMICAL INJECTOR
CHEMICAL INJECTOR OPERATIONS
The chemical injector is used in conjunction with the Soaper Nozzle and a
Cleaning Solution.
The PSI will be much lower in this application. The soap will only
draw with High Flow and Low Pressure.
2
Drop soap hose lter in
detergent container.
4
Spray with gun as
normal.
1
Attach soaper nozzle
to the tip of the Lance.
3
13HP ONLY:
Open valve on Chemi-
cal Injector to allow
Suction.
5
6
4.75HP ONLY:
Snap nozzle forward to
activate soap supply.
Chemical will only ow
in the low pressure
(forward) position.
4.75HP ONLY:
Snap nozzle back
to deactivate soap
supply and increase
pressure.