NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR
WHILE CONNECTED TO A POWER SOURCE
© 2020, BE Pressure Kerosene Forced Air Heater User’s Manual
5
- Remove the heater and all packaging
materials from the shipping carton.
Tools Needed:
- Phillips Head Screw Driver
- 8 mm open end wrench
- 19 mm open end wrench
Assembly Instructions
Models: HK125FW / HK175FW / HK215FW
What’s In The Box
Tires (2) Axle Nuts (2)
Spacers (2)
Front Handle
Axle
Rear Handle
Wheel Support Frame
Tip: Be sure to remove the axle from the
side of the Styrofoam packaging.
Tip: Use a power screwdriver and
locking wrench for easier assembly.
8mm Nuts (8)30mm Screws (4)
50mm Screws (4)
To Next Page
Loading...
