BE HK045F - Page 5

NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR
WHILE CONNECTED TO A POWER SOURCE
© 2020, BE Pressure Kerosene Forced Air Heater User’s Manual
4
Assembly Instructions
Models: HK045F / HK070F
What’s In The Box
Cord Wraps (2) Carry Handle (1)
Black Screws (2); White Screws (2)
Carry Handle Assembly
1. Align holes in the upper housing with the 2
holes in the handle as shown in Figure 3.
2. Insert screws and tighten firmly.
Cord Wrap Assembly
1. Insert tabs into square slots in shell support
and line up screw holes as shown in Figure 4.
2. Insert screws and tighten firmly.
Tools Needed:
- Phillips Head Screw Driver
Figure 3
Figure 4
- Remove the heater and all packaging materials
from the shipping carton
Note: Save the box and packaging materials
for future storage.