Beaba MILKEO - Bottle Preparation Procedures; Accurate Powder Dosing; Using the Bottle Preparation Function

5. Dosing the powder
To determine the quantity of powder, check whether your brand of powder indicates the weight of a measure.
• If the weight is indicated:
-Set the quantity of water at 60 ml
-Double the weight of a measure and set the quantity of powder at this value.
You can then modify the quantity of water, the powder/water ratio will be saved.
• If the weight is not indicated:
-Weigh out 3 measures to obtain a reference weight
-Set the quantity of water at 90 ml
-Set the quantity of powder at the reference weight
You can then modify the quantity of water, the powder/water ratio will be saved.
• If you cannot weigh out 3 measures, you can temporarily set 9 g of powder for 60 ml of water.
Note: The dosage of your baby bottle may vary slightly depending on the density of your milk powder.
6. Bottle preparation function
To prepare a bottle:
- Place the bottle on the bottle stand
4
- Press the preparation button to start the preparation
Press any button to stop preparation
14