22 Beachcomber Hot Tub Owner’s Guide www.beachcomberhottubs.com 23
EverLite 4 Operating Instructions
EverLite 6 Operating Instructions
1. Beachcomber Mode: The light will sequence from Red, to Green, to Blue continuously.
Press the light button once to start the ‘Beachcomber Mode’. The light will stay on each solid color for three seconds. The color will
blend with the next color for four seconds before the next color becomes a solid. To turn off, press the button once.*
2. Freeze Mode: As it cycles through the ‘Beachcomber Mode’, the light can be frozen on any solid or blended color.
Choose a color, and then touch the button twice (off, then on) within four seconds to switch to ‘Freeze Mode’. To turn off, press the
button once.
3. Pulse Mode: This is a random cycling mode, which imitates the soothing rhythm of a heartbeat.
When in the ‘Freeze Mode’, touch the button twice (off, then on) within four seconds to switch to ‘Pulse Mode’. To turn off, press the
button once.
4. White Mode: This mode recreates natural white light.
When in the ‘Pulse Mode’, touch the button twice (off, then on) within four seconds to switch to ‘White Mode’. To turn off, press the
button once.
*Note: If the light is left off for more than ten seconds, it will revert back to ‘Beachcomber Mode’ when switched back on.
1. Beachcomber Mode A: The light will sequence from Red, to Green, to Blue continuously.
Press the light button once to start the ‘Beachcomber Mode A’. The light will stay on each solid color for three seconds. The color will
blend with the next color for four seconds before the next color becomes a solid. To turn off, press the button once.*
2. Freeze Mode: As it cycles through the ‘Beachcomber Mode A’, the light can be frozen on any solid or blended color.
Choose a color, and then touch the button twice (off, then on) within four seconds to switch to ‘Freeze Mode’. To turn off, press button
once.
3. Pulse Mode: This is a random cycling mode, which imitates the soothing rhythm of a heartbeat.
When in the ‘Freeze Mode’, touch the button twice (off, then on) within four seconds to switch to ‘Pulse Mode’. To turn off, press button
once.
4. White Mode: This mode recreates natural white light.
When in the ‘Pulse Mode’, touch the button twice (off, then on) within four seconds to switch to ‘White Mode’. To turn off, press the
button once.
5. Beachcomber Mode B: All lights above waterline are turned on, while all underwater lights are off.
When in the ‘White Mode’, touch the button twice (off, then on) within four seconds to switch to ‘Beachcomber Mode B’. To turn off,
press the button once.
6. Beachcomber Mode C: All the lights below the waterline are turned on, while all the lights above the water line are off.
When in the ‘Beachcomber Mode B’, touch the button twice (off, then on) within four seconds to switch to ‘Beachcomber Mode C’. To
turn off, press the button once.
*Note: If the light is left off for more than ten seconds, it will revert back to ‘Beachcomber Mode A’ when switched back on.
Turbo
The optional Turbo increases the amount of air turbulence that comes out of the jets. It enhances
massage pressure, turbulence and water action. With the Turbo activated and air controls closed, air
from the Turbo will come out of the 4 relief jets found in the foot well of the hot tub.
Ozone
Your hot tub may be factory equipped with an optional Ozonator unit, or factory pre-plumbed to
accept the installation of an Ozonator. Ozonators produce a powerful gas, and injects it into the
hot tub water to oxidize organic contaminants in the water and improve water clarity. Please note:
an Ozonator is not designed to replace your main sanitizer or disinfectant system. The Ozonator
is equipped with a small viewing window. When ozone gas is produced, a purple glow will be
emitted and is best seen at night through this window. This purple glow diminishes over time as the
chip wears out. When no purple glow is seen during filtration cycles (not heating cycles), this is an
indication that the chip requires replacement. The chip is rated at 9000 hours (one year).
Turbo
Ozone
ClearTech UVC System
Hush Pump
NO USER SERVICEABLE PARTS. DO NOT ATTEMPT TO
SERVICE AN OZONATOR OR ANY OTHER PART OF YOUR
BEACHCOMBER HOT TUB EQUIPMENT PAK. CONTACT YOUR
LOCAL STORE FOR SERVICE AND/OR REPLACEMENT.
THE USE OF AN OZONATOR IS NOT A REPLACEMENT FOR A
WATER SANITIZING PROGRAM. FAILURE TO PROPERLY SANITIZE
HOT TUB WATER CAN CAUSE IRRITATION AND/OR DISEASE.
NO USER SERVICEABLE PARTS. DO NOT ATTEMPT TO SERVICE
A CLEARTECH UV UNIT OR ANY OTHER PART OF YOUR
BEACHCOMBER HOT TUB EQUIPMENT PAK. CONTACT
YOUR LOCAL STORE FOR SERVICE AND/OR REPLACEMENT.
DO NOT VIEW THE UV BULB IN OPERATION. UV RAYS CAN
CAUSE IRRITATION AND/OR BLINDNESS.
THE USE OF A CLEARTECH UV UNIT IS NOT A REPLACEMENT
FOR A WATER SANITIZING PROGRAM. FAILURE TO PROPERLY
SANITIZE HOT TUB WATER CAN CAUSE IRRITATION AND/
OR DISEASE.
WARNING
WARNING
ClearTech UVC Water Care System
Your hot tub may be equipped with ClearTech. This unit uses a specialized ultra violet light bulb
which produces UV light. The ClearTech UVC unit reduces the amount of sanitizer that is required to
maintain a government approved sanitizer level. The UV bulb is rated at 15,000 hours. The glass
sleeve covering the bulb should be inspected and cleaned (if necessary) at each drain and fill. For
service or replacement, consult your Beachcomber store.
Hush Pump
The Hush Pump is a very quiet, low energy consumption, high flow circulation and filtration pump that
looks after the filter and heating functions of your hot tub. It comes set from the factory to operate 24
hours a day.
To Next Page
Loading...
