16
Edit Menu
There are three selections available in the Edit
Menu.
Suppress Reminders: Your system will periodically
remind you to perform certain maintenance
tasks on your hot tub. If you do not want these
reminders to display, you can suppress them.
See the Control Panel section for a complete
list of the reminders and what they mean.
Temperature display: You have the option of
changing the default temperature display from
Fahrenheit to Centigrade.
24 hour Time Display: If your hot tub is a 700
series you can select whether your clock is in 24
hours (Military) format or 12 hour (am/pm).
TO ENTER THE EDIT MENU
160, 300 & 500 Series
Press
,
,
and then
700 Series
Press
or
, 1, , and 1
Press
(
or
for the ET-7) to scroll
through the following available sub-menus.
• SRN OR SRY (Suppress Reminders)
• TCY OR TCN (Temperature Display)
• 24Y OR 24N (24 Hour Time Display)
Once a selection is made you will see one of
the following on your display:
SRN OR SRY
Press
( 1 for the ET-7) and the N or Y
will flash. Press
(
or for the ET-7)
to choose Y to suppress reminders or N to not
suppress reminders. Press
( 1 for the
ET-7) to accept your selection. Press (
or for the ET-7) to go to the next setting
selection.
TCY OR TCN
Press
( 1 for the ET-7) and the N or Y
will flash. Press
(
or for the ET-7)
to choose Y for Celsius or N for Fahrenheit.
Press or ( 1 for the ET-7) to accept your
selection. Press ( or for the ET-7)
to go to the next setting selection.
24Y OR 24N
Press 1 and the N or Y will flash. Press
or to select either Y for Military or N for
am/pm. Press 1 to accept your selection.
Press or to go to the next setting
selection.
To exit Edit Menu press twice.
To Next Page
Loading...
