Beam Tech BS-600 - 8 Specifications


8. SPECIFICATIONS:
BS-600 BS-1200 BS-1700 BS-2200
CAPACITY
600VA/360W
1200VA/700W
1700VA/1050W
2200VA/1400W
INPUT Voltage Frequency Selectable 100/110/115/120V 1ø or 200/220/230/240V 1ø
50Hz/60Hz Auto detect
Current (110V/220V) 6A / 3A 12A / 6A 16A / 8A 21A / 10A
Voltage 100/110/115/120V 1ø or 200/220/230/240V 1ø ±6% for Back-up Mode
＜
＜＜
＜ ±10% for AVR
Frequency 50Hz or 60Hz ± 0.1Hz (Selectable under DC start)
OUTPUT
Wave Form Simulated Pseudo Sine Wave
Current (110V/220V) 5.5A / 2.8A 11A / 5.5A 15.5A / 7.8A 20A / 10A
TRANSFER TIME 4 ms t
yp
ical.
BATTERY Lead-Acid, maintenance free
Voltage/Capacity 12V 7Ah X 1pcs 12V 7Ah X 2pcs 12V 7Ah X 3pcs 12V 7Ah X 4pcs
Level Ind. YES YES YES YES
Recharge Time 90% within 8 hrs 90% within 5 hrs
LED/ALARM INDICATION
Normal/In charge GRN LED, No Beep.
Back up / Abnormal Input Voltage ORG LED Flashing, 2 Beeps / 8 sec.
Abnormal Input Frequency (Back up) ORG LED Rapid Flashing, No Beep.
Green mode auto off ORG LED flashing, 1 Beep / 4 sec. (Auto off after 24 sec.)
Low Battery ORG LED Flashing, 4 Beeps / sec.
Battery Replacement RED LED Flashing, 8 Beeps/ sec.
Over Load/Fault RED LED Flashing, Continuous Beep.
INDICATION OF SPECIAL STATUS Replace Battery / Alarm Off / Charging / Buck / Boost
DC START / ALARM RESET YES YES YES YES
BATTERY LOAD INDICATION YES YES YES YES
ENVIRONMENT TEMP. 0 - 37 ℃
℃℃
℃
ENVIRONMENT HUMIDITY 30-95% Non-Condensing
DIMENSIONS (L x H x W) (cm) 38 x 20 x 18 38 x 20 x 18 44 x 20 x 18 51 x 20 x 18
SHIPPING DIM. (L x H x W) (cm) 48 x 33 x 30 48 x 33 x 30 54 x 33 x 30 61 x 33 x 30
WEIGHT (N.W. / G.W.) (kgs) 9/10 15/16 21.50/22.50 25/26