To Next PageTo Next Page
Need help?Do you have a question about the Beam 17R and is the answer not in the manual?
General| Brand | Beam |
|---|---|
| Model | 17R |
| Category | Lighting Equipment |
| Language | English |
Details on fire prevention, distance from flames, heat sources, and operating temperature.
Instructions for electrical safety, including earthing, power connection, and IP rating.
Guidance on safe handling and rigging, including safety chains and clamps.
Lists fixture, lamp, and flight case part numbers for identification.
Details pan/tilt range, DMX connectors, thermal limits, and physical dimensions.
Provides power supply, color temp, consumption, ballast, and display information.
Describes prism, dimmer, shutter, frost, focus, and gobo functions.
Outlines wire color to pin assignments for USA and EU power connections.
Explains DMX input/output wiring and the need for signal termination.
Introduces the control board and explains menu navigation.
Select run modes and configure the starting DMX address.
Choose DMX channel mode and pre-programmed demo sequences.
Invert Pan/Tilt movement and swap Pan/Tilt DMX channels.
Configure encoders and response to no DMX signal.
Adjust display power save, lamp start, and color behavior.
Resets the fixture to factory default settings.
Maps DMX values to color selections, including CTO effects.
Maps DMX values to shutter functions like strobe and random strobe.
Maps DMX values for dimmer control from off to full.
Maps DMX values to gobo selection, rotation, and shake effects.
Controls prism engagement and basic function.
Maps DMX values for prism rotation direction and speed.
Outlines safety precautions, professional installation, and secondary attachments.
Controls frost effect, beam focus, and Pan/Tilt speed.
Manages Pan/Tilt movement, fine adjustments, and resets.
Controls lamp on/off states using DMX signals.
Periodic inspection points for safety and component integrity.
Guidelines for cleaning the lens, fans, gobos, and interior of the fixture.
Notes on fuse replacement and professional power cable servicing.
Lists part numbers for fixture components like motors, PCBs, and lenses.
Explains warranty terms, exclusions, and consumer responsibilities.
Provides company address, phone, fax, and website for support.
