Need help?Do you have a question about the Beamz BBP96S and is the answer not in the manual?
Critical safety advice for connecting the unit to a power outlet, including voltage matching.
Importance of protective ground connection and precautions against deactivating it.
Information on proper disposal of the product as electronic waste.
Controlling Blackout, Auto, and Sound modes using the remote.
Adjusting strobe speed and program speed with the remote controller.
Adjusting sound sensitivity, DMX modes, and fade speed via the remote.
Manual color selection and brightness adjustment using the remote controller.
Critical safety advice for connecting the unit to a power outlet, including voltage matching.
Importance of protective ground connection and precautions against deactivating it.
Information on proper disposal of the product as electronic waste.
Controlling Blackout, Auto, and Sound modes using the remote.
Adjusting strobe speed and program speed with the remote controller.
Adjusting sound sensitivity, DMX modes, and fade speed via the remote.
Manual color selection and brightness adjustment using the remote controller.
General| Control type | Buttons |
|---|---|
| Product type | Disco stroboscope |
| On/off switch | Yes |
| Product color | Black |
| International Protection (IP) code | IP20 |
| Power source | AC/Battery |
| Battery voltage | 12.6 V |
| Battery capacity | 9.6 Ah |
| Lamp type | LED |
| Illuminance | 7027 lx |
| Light color | Amber, Blue, Green, Red, Ultraviolet (UV), White |
| Lamps quantity | 6 lamp(s) |
| Quantity | 1 |
| Field of view | 27 ° |
| Beam angle (max) | 23 ° |
Weight and Dimensions| Width | 130 mm |
|---|---|
| Height | 120 mm |
| Ball diameter | - \ |
To Next Page
