Need help?Do you have a question about the Beamz BBP96 and is the answer not in the manual?
Read manual, avoid fire/shock, use qualified technicians, keep manual, ask specialist, initial smell is normal.
Avoid opening housing, no metal objects/liquids, keep away from heat/vibration, do not cover vents, avoid rain/moisture.
Handle mains lead carefully, pull plug not lead, avoid wet hands, replace damaged parts, do not use dimmers, unplug during storms.
Do not look into LEDs, avoid frequent switching, keep from children, use clean hands, check after damage, use original spares.
Connect to specified voltage, use protected circuit, ensure electrical ground for safety.
Install securely to hold 10x weight, use secondary safety attachment, clear area below, get expert approval.
Read manual, avoid fire/shock, use qualified technicians, keep manual, ask specialist, initial smell is normal.
Avoid opening housing, no metal objects/liquids, keep away from heat/vibration, do not cover vents, avoid rain/moisture.
Handle mains lead carefully, pull plug not lead, avoid wet hands, replace damaged parts, do not use dimmers, unplug during storms.
Do not look into LEDs, avoid frequent switching, keep from children, use clean hands, check after damage, use original spares.
Connect to specified voltage, use protected circuit, ensure electrical ground for safety.
Install securely to hold 10x weight, use secondary safety attachment, clear area below, get expert approval.
General| IP Rating | IP65 |
|---|---|
| Weight | 4.2 kg |
| Compatibility | DMX512 |
| Software Included | No |
| LED Colours | RGB |
| DMX Channels | 6, 10 |
| Power Supply | 100-240VAC, 50/60Hz |
| Type | Par Can |
| Channels | 6, 10 |
| Inputs | DMX |
| Outputs | DMX |
To Next Page
