This controller has a wireless DMX transmission on board which operates on 2.4Ghz frequency band. The controller acts as a transmitter and needs
a receiver (item 154.077 BPP Wireless DMX Transmitter/Receiver) or Beamz fixture with built-in 2.4Ghz DMX transmission.
To activate wireless DMX:
Press button,
Select and confirm with button,
Note: Keeps DMX address standard at value “1”, in complex installation you can change start address.
Select and confirm with button,
Select and press button to switch between “ON” and “OFF”.
Select and press button to select your wireless DMX universe with number 1 to 7.
Ready? Go back to the “main” menu with button.
Note: If you want to turn off the LED indicator near the display, you can easily do this by going to , , and
press button to select “OFF”.
Operation examples:
With this controller you are able to create 8 different chases with 15steps each, play chase with adjustable speed and fade time.
Create your own chase:
Press button,
Select and confirm with button,
Select and confirm with button,
Select your chase ID with or button and confirm with button,
Select and confirm with button.
Before we go further you need to know each function in OLED display:
To Next Page
Loading...
Need help?
General
