The provided document is a Quick Start Guide for the BeamZ PS08S, a power switch panel designed for lighting products and other electrical equipment. It serves as a central control unit for managing power distribution to multiple devices.
Function Description
The BeamZ PS08S is an 8-channel power switch panel that allows users to individually control the power supply to up to eight connected devices. It is designed to simplify the setup and operation of lighting rigs and other electrical installations by providing a convenient and safe way to switch multiple units on and off. The panel includes a reset button for overload current protection, ensuring the safety of connected equipment and the unit itself. It is intended for indoor use and is suitable for various applications, including club effects, stage lighting, and general event setups where controlled power distribution is required.
Important Technical Specifications
- Model: PS08S
- Product Code: 154.040 V1
- Number of Channels: 8 individually switchable power outlets.
- Power Cord: 3 x 2.5 mm² (Brown live (L), Blue neutral (N), Green/Yellow earth (E)).
- Maximum Current (Total Outputs): 15A.
- Maximum Wattage (Total Outputs): 3400 Watt.
- Overload Protection: Features a reset button for overload current.
- Input Voltage: Must match the mains voltage and frequency specified on the equipment label.
- Operating Temperature Range: -5°C to +45°C.
- Intended Use: Exclusively for indoor use.
- Ventilation: Requires at least 50 cm of free air space around the unit for proper ventilation.
- Grounding: Must be connected to an outlet with a protective ground.
Usage Features
The PS08S is designed for ease of use and safety in managing power for multiple devices.
- Individual Channel Control: Each of the eight power outlets has its own dedicated on/off switch, allowing for precise control over individual connected devices. This is particularly useful in lighting setups where different fixtures need to be activated or deactivated independently.
- Overload Protection: A prominent reset button is included to protect against overload currents. If the total current drawn by connected devices exceeds the maximum safe limit (15A), the unit will trip, and power can be restored by pressing the reset button once the load is reduced. This feature prevents damage to the unit and connected equipment.
- Clear Indicators: The switches for each channel are likely accompanied by indicators (though not explicitly detailed, typical for such devices) to show their current state (on/off), making it easy to monitor the power status of each connected device.
- Robust Connections: The unit uses standard safety power outlets for connecting fixtures, ensuring secure and reliable power delivery. The main power input requires a robust connection to the mains supply.
- No Dimmer Compatibility: The manual explicitly states that the unit should not be connected to a dimmer pack or an adjustable power supply. This ensures that the unit operates within its intended power parameters and prevents potential damage.
- Quick Start Guide Format: The document itself is a "Quick Start Guide," indicating that the device is designed for relatively straightforward setup and immediate use, with more detailed information available in a full manual.
Maintenance Features
Proper maintenance is crucial for the longevity and safe operation of the BeamZ PS08S.
- Regular Inspection: Users are advised to regularly check the unit and its power cord for any signs of damage or wear. This includes inspecting cables for crimps or damage and ensuring all connections are secure.
- Cleaning: The unit should be cleaned using a dry cloth. Avoid using liquids or abrasive cleaners that could damage the internal components or exterior finish.
- Ventilation Management: It is critical to ensure that ventilation slots are not blocked and that there is always at least 50 cm of free air space around the unit. This prevents overheating, which can lead to malfunctions and reduce the lifespan of the device.
- Temperature Control: The unit should not be exposed to extreme heat, moisture, or dust. If the unit has been exposed to drastic temperature fluctuations (e.g., after transportation), it should be allowed to reach room temperature before being switched on to prevent condensation damage. The operating ambient temperature range is specified as -5°C to +45°C.
- Disconnection During Non-Use/Cleaning: Always disconnect the unit from the mains power when it is not in use or before cleaning. This is a fundamental safety precaution.
- Professional Repairs: Any repairs, servicing, or electrical connections should only be carried out by a qualified technician. Users are explicitly warned not to dismantle or modify the unit, bypass thermostatic switches or fuses, or attempt to repair it themselves. Using incorrect fuses/bulbs is also prohibited.
- Proper Storage: When not in use for extended periods or during lightning strikes, the power cord and adapter should be unplugged from the power outlet.
- Environmental Disposal: The product is marked with a symbol indicating it should not be treated as household waste. Instead, it should be handed over to an applicable collection point for the recycling of electrical and electronic equipment, promoting environmental responsibility.
- Unattended Operation: The unit should never be left running unattended, emphasizing the need for user supervision during operation.
- Packaging Retention: Users are advised to retain the original packaging materials. In case the product needs to be returned to the factory, it must be returned in its original box and packing to prevent transit damage.
Need help?
General
To Next Page