15
EN
11.10 Why does the robot automatically return when the battery is not used up?
The robot returns automatically before the battery is depleted to prevent the following
situations:
In case the battery runs out and the robot shuts down, it may not be able to report its
status in a timely manner.
To prevent deep discharging of the battery, which can help prolong the battery's lifespan.
Before each use, please ensure that the robot has sufficient battery power for optimal per-
formance.
12 After-sales Service
WEEE Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in
directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead,
you should protect human health and the environment by handing over your waste equip-
ment to a designated collection point appointed by the government or local authorities for
recycling waste electrical and electronic equipment. Correct disposal and recycling will
help prevent potential negative consequences to the environment and human health.
Please contact the installer or local authorities for more information about the location as
well as the terms and conditions of such collection points.
The lithium-ion pack contains substances that are hazardous to the environment.
Before disposing of the robot, please remove the battery pack, then discard or recycle
it. It is used according to local laws and regulations of the country or region.
Warranty Policy
After-sales Email
Official Website
North America Toll Free
2-year warranty
service@beatbot.com
North America Region: www.beatbot.com
Europe Region: eu.beatbot.com
(833) 702-4399
Mon-Sun 9:00 am-6:00 pm (CST)
* Please refer to the Beatbot official website for the latest after-sales policy.
To Next Page
Loading...
