Need help?Do you have a question about the Beats Solo2 and is the answer not in the manual?
General| Type | On-ear |
|---|---|
| Connectivity | Wired |
| Foldable | Yes |
| Wireless | No |
| Noise Cancelling | No |
| Microphone | Yes |
| Impedance | 32 ohms |
| Connector | 3.5mm |
| Color Options | Black, White, Red, Blue, Pink |
| Frequency Response | 20Hz - 20kHz |
| Weight | 205 g |
| Cable Length | 1.361 meters |
| Bluetooth | No |
Expand and collapse the earcups to play and store the headphones.
Slide earcups up/down ensuring correct orientation for proper fit.
Press the power button without the cable for wireless operation.
Press the power button to turn off the headphone.
Press and hold the 'b' button for 2 seconds to enter pairing mode.
Pair with your device when the Bluetooth indicator light is blinking.
Controls for playback, track skipping, and volume adjustment.
Controls for call management, voice commands, and volume.
Plug the straight cable end into your device for wired mode.
Plug the L-shaped cable end into the source device for wired mode.
Control music playback and volume using the RemoteTalk feature.
Manage calls and use voice commands with RemoteTalk.
Collapse both earcups and place them in the case for storage.
Charge the device using the provided micro USB cable.
Turn on the device while unplugged to see the power gauge.
Visit www.namemybeats.com to personalize your Beats.
Information on maintaining and caring for the product.
Details on obtaining and installing software updates.
Instructions for registering your product for warranty.
Guidance for resolving common product issues.
Details regarding product warranty coverage and claims.
Contact information for customer support and assistance.
To Next Page
