To Next PageTo Next PageWhat to do if my Beaumark Ranges clock and timer do not work?
If the clock and timer aren't working, make sure the range is properly plugged into a grounded electrical outlet. Check your home's fuse box or circuit breaker and replace the fuse or reset the breaker if necessary. Also, verify that the oven controls are properly set.
What to do if my Beaumark 14721 control signals after entering cooking time or start time?
If the control signals after entering cooking time or start time, you may have forgotten to enter a bake temperature or cleaning time. Touch the BAKE pad and desired temperature or the SELF CLEAN pad and desired clean time.
Why is my food not baking or roasting properly in my Beaumark 14721 Ranges?
Improper baking or roasting can stem from several factors. Please, check the oven controls. Also, shelf position may be incorrect, or you might be using incorrect cookware. Other potential causes include the oven thermostat needing adjustment, the clock not being set correctly, improper use of aluminum foil, or the oven bottom not being securely seated.
What to do if surface burners light but oven does not on my Beaumark 14721?
If the surface burners light but the oven does not, the oven gas shut-off valve may have accidentally been moved during cleaning or moving. To check it, remove the storage drawer or warming drawer and look for the gas shut-off lever at the back of the range.
Essential safety warnings for using the appliance to prevent hazards like fire, explosion, or injury.
Instructions and warnings regarding the anti-tip device to prevent range tipping and potential injury.
Steps to take if you smell gas to ensure safety and prevent explosions.
Guidelines for qualified installation and proper electrical grounding to ensure safe operation.
Precautions for range location, floor coverings, and preventing fires from flammable materials.
Warnings and best practices for using the surface burners safely, including cookware and flame control.
Safe practices for oven use, including cooking temperatures, vent operation, and preventing foodborne illness.
Important safety guidelines and preparation steps for the self-cleaning cycle to prevent damage and hazards.
How to light, use, and select flame sizes for the gas surface burners.
Recommendations for cookware, avoiding prohibited accessories, and operation during power failure.
Explanation of the oven control panel, buttons, and display functions.
Guidance on oven shelf placement, vent operation, and performance during power outages.
Steps for setting oven temperature, time, preheating, and pan placement for baking and roasting.
Instructions for setting the broil function and a guide for broiling different foods.
How to set and use the clock, timer, and manage power outage effects on time settings.
Setting immediate or delayed start and automatic stop for baking and roasting cycles.
Utilizing features like 12-hour shut-off, temperature unit selection, and tone customization.
Managing clock display options, cook and hold, and control lockout functions.
How to set and use the oven for baking/roasting during Sabbath observance.
Procedures for disabling or exiting the Sabbath mode after use.
Guide for self-adjusting the oven thermostat for temperature accuracy.
Steps for initiating and managing the self-cleaning cycle, including pre-cycle preparations.
How to delay the self-clean start and procedures for after a clean cycle.
General guidelines for cleaning sealed burner assemblies and drip pans.
Procedures for cleaning and correctly replacing burner caps and heads.
Instructions for cleaning burner grates, porcelain, and stainless steel cooktop surfaces.
How to clean the lift-off oven door and the oven bottom interior.
Steps for removing, cleaning, and replacing the storage drawer.
Cleaning the control panel, knobs, oven shelves, and replacing the oven light bulb.
Key steps before installation, including reading safety information and gathering tools.
Critical safety rules regarding installation, clearances, and preventing hazards.
Specifications for required dimensions and clearances around the range for safe installation.
Selecting a safe installation location and securing the anti-tip device.
Requirements for gas supply type, pressure, and connecting the range to the gas line.
Diagrams showing optimal locations for gas pipe and electrical outlets for installation.
Diagrams illustrating flexible and rigid pipe hookup methods for gas connection.
Requirements for electrical connections, including grounding and extension cord usage.
Verifying power cord disconnect, surface burner, and oven burner ignition.
Procedures for adjusting burner air shutters and leveling the range.
Securing the anti-tip device and instructions for converting to LP gas.
Solutions for common problems like burners not lighting or timer malfunctions.
Addressing issues with broiling, oven temperature, self-cleaning, and door operation.
Resolving problems with the display, error codes, and control pad responsiveness.
Addressing odors emitted from the vent and issues with the storage drawer's functionality.
Information and address for registering product ownership, particularly for Canadian consumers.
The form details for registering your product online or via mail.
Details of the warranty coverage, limitations, and the Totalguard Service Protection Plan.
Information on where to find and purchase accessories for the range.
Contact information for product inquiries, in-home repair service, and parts ordering.
General