16
Ultra safe mode
Use the buttons 15 16 to select between OFF or ON. Press button 13
to confirm.
ON - There is zero radiation from BU during standby mode, will show up on
icon screen. However, no alarm will be provided when PU exceeds the
communicating range of BU.
OFF - Once the PU is unable to receive signal from BU, an alarm will be heard
and show flashing on icon screen.
High temperature alarm
Use the buttons 15 16 to select a high limit ( allowable range from
10°C/50˚F to +50°C/122˚F ) above which the PU will provide alarm ( will
show on icon screen in red colour and temperature reading flashing). In case
OFF is selected, no limit is set. Press button 13 to confirm.
Low temperature alarm
Use the buttons 15 16 to select a low limit ( allowable range is -9°C/16˚F
to 3° below the selected high limit) below which the PU will provide an alarm (
will show on icon screen in white colour and temperature reading flashing). In
case OFF is selected, no limit is set. Press button 13 to confirm.
To Next Page
Loading...
