PRECAUTIONS
-Use only the supplied AC adapters, use of other adapters may cause damage to
the baby monitor.
-When not using the monitor for a long period of time, remove all batteries from
the PU, BU and movement sensor mat to avoid damage due to battery leakage.
-Disconnect the AC adapter from the wall outlet when the monitor is not to be
operated.
-The unit is best performed within a temperature range of -10°C/14˚F to
+50°C/122˚F.
-Do not open the cabinet, no serviceable parts inside.
-The unit should not be exposed to dripping, splashing and that no objects filled
with liquids, such as vases shall be placed on it.
-Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent.
-Batteries (battery pack or batteries installed) shall not be exposed to excessive
heat such as sunshine, fire or the like.
-The MAINS plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable
-Only use the power supply as included in the packaging.
STANDARD ACCESSORIES
a. Baby unit
b. Parent unit with belt clip
c. Stand for PU
d. 3.7V Li polymer rechargeable battery pack (installed in PU)
e. 5V AC adapters x 2
f. Movement sensor mat (optional)
a. b. c. d.
e. f.
22
To Next Page
Loading...
