2. Adjust headrest. (see section 4.2)
3. Remove baby seat pad. Follow
step 1, 2 & 3 in section 5 to lock
the child car seat to vehicle’s
ISOFIX anchor points. Let the
child sit in the child car seat and
recheck the height of the
headrest (see section 4.2 for
adjustment).
4. Pull out the vehicle safety belt
and guide it through headrest
safety belt guide. Lock the safety
belt tongue into the safety belt
buckle with a distinct CLICK
sound.
5. Keep diagonal part of the vehicle
safety belt under child’s arm. Let
the lap part go through seat base
safety belt guide and stay
beneath child’s hands. Make sure
the vehicle safety belt is not
twisted during installation.
To Next Page
Loading...