Bebehut Trio-Fix - 1 APPLICABLE USAGE IN VEHICLE

1 APPLICABLE USAGE IN VEHICLE
This child car seat is designed for child group 1, 2 and 3 (weight from 9 to 36kg). It should be
installed in the following way:
Child group
Weight
Installation
Category
1
9 – 18kg
ISOFIX + top tether + 5-
point harness
ISOFIX Universal
2
15 – 25kg
ISOFIT + 3-point vehicle
safety belt
Semi-universal
3
22 – 36kg
2
15 – 25kg
3-point vehicle safety belt
Universal
3
22 – 36kg
This child car seat can only be installed in vehicle seat positions specified below:
？: Only applicable if the seat is not equipped with airbag.
NOTICE:
 This child car seat can only be installed toward the direction of travel (i.e., forward facing).
 When installed via ISOFIX or ISOFIT, this child car seat requires ISOFIX and/or top tether
anchorage. DO read the car user manual to verify the exact configuration of ISOFIX and top
tether on your vehicle before installation.
 For child group 2 & 3, this child car seat only fits 3-point vehicle safety belt with retractor
meeting the requirements of Regulation No. 16 (ECE R16).
 This child car seat MUST NOT be installed into vehicle seat equipped with airbag.
 This child car seat MUST NOT be installed into lateral or rear facing vehicle seat.