EasyManua.ls Logo

Becker DTM - General Instructions; RDS System and Seek Levels

Becker DTM
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
134
*HQHUDO,QVWUXFWLRQV
*HQHUDO,QVWUXFWLRQV
5'66<67(0
This car radio is capable of receiving RDS signals (RDS =
Radio Data System) in the VHF range. RDS is a technique
which enables the transmission of inaudible additional infor-
mation in the VHF broadcasting range. This means that the
transmitting station sends information capable of being ana-
lysed by the car radio.
'$66HHN4XDO/HYHO
At the level   ,,2<(3Y, all receivable and identifiable
RDS programs are stored in a list according to their quality.
The dynamic autostore, search and scan search functions
access upon this list.
'$66HHN1DPH/HYHO
At the level   ,,2(4, all receivable and identifiable
RDS programs are stored in a list alphabetically by name. The
dynamic autostore, search and scan search functions access
this list.
5'66WDWLRQV/HYHO
At the level   ;(;065: only identified RDS stations can
be stored. The unit constantly switches to the best receivable
transmission frequency for the station.
During search for
  ;(;065: the unit will stop only at
identifiable stations.
6WDWLRQV)L[/HYHO
At the level ;(;065: 0? frequencies can be assigned to
the station buttons. RDS evaluation does not take place. The
search for
;(;065:0? is equivalent to manual FM tuning
(page 113).

Other manuals for Becker DTM

Related product manuals