Maintenance and cleaning
Version: 2.1 ─── 53AS2000
Intervals
Under nominal conditions, the motor components have different op-
erating hours. We have provided you with a list of maintenance work
and intervals for the associated components below:
Component Interval Maintenance
Ball bearing 30000 operating hours Replace bearing
Motor 2500 operating hours / annually Check motor for bearing noises
If noises are detected:
do not continue to operate motor; replace bearing
Cables regular intervals Perform visual inspection and check for damage
As required:
Replace cables
5 million bending cycles Replace cables
Plug and socket 100 mating cycles Replace prefabricated cable and stepper motor
To Next Page
Loading...