Product overview
Note
Availability of the function blocks
These function blocks are available in the TwinCAT builds starting from version
TC2.11 R3 Build 2240
TC3.1 Build 4015
With older versions an update is required for the use of the function blocks.
Illustration of the display with the System Manager
There are six tabs in the System Manager. These are briefly described below. The focus is thereby placed
on the parameter that is relevant for the power supply unit
Tab: General
The general properties of the power supply unit are displayed here.
CX2100-09x4 15Version: 1.3
To Next Page
Loading...