Beckhoff CX2100-0904 - TYPE E_Batterystatus; TYPE E_Upscommstatus

Commissioning
Requirements
Development environ-
ment
Target system type UPS hardware PLC libraries to include
TwinCAT v2.8.0, Build >
745 TwinCAT v2.9.0,
Build > 945
PC (i386) • Beckhoff P24Vxxxx
USV;
• Integrated Beckhoff
Industrial PC 24V
UPS connected to
CP903x ISA or PCI
card;
• With Beckhoff
Industrial PC's
delivered APC UPS
models supporting
smart protocol and
configured with
Windows UPS
Service;
TcIoFunctions.Lib
( Standard.Lib;
TcBase.Lib;
TcSystem.Lib;
TcUtilities.Lib are included
automatically )
5.3.3 TYPE E_BatteryStatus
TYPE E_BatteryStatus :
(
BatteryUnknownStatus, (*The battery status is unknown.*)
BatteryOk, (*The batteries are OK.*)
BatteryReplace (*The batteries need to be replaced.*)
);
END_TYPE
Requirements
Development environ-
ment
Target system type UPS hardware PLC libraries to include
TwinCAT v2.8.0, Build >
745 TwinCAT v2.9.0,
Build > 945
PC (i386) • Beckhoff P24Vxxxx
USV;
• Integrated Beckhoff
Industrial PC 24V
UPS connected to
CP903x ISA or PCI
card;
• With Beckhoff
Industrial PC's
delivered APC UPS
models supporting
smart protocol and
configured with
Windows UPS
Service.
TcIoFunctions.Lib
( Standard.Lib;
TcBase.Lib;
TcSystem.Lib;
TcUtilities.Lib are included
automatically )
5.3.4 TYPE E_UpsCommStatus
TYPE E_UpsCommStatus :
(
UpsCommUnknownStatus, (* The communication path to the UPS is unknown. *)
UpsCommOk, (* The communication path to the UPS is OK. *)
UpsCommFailed (* The communication path to the UPS has failed. *)
CX2100-09x4 73Version: 1.3