Beckhoff CX2100-0904 - Page 72

Commissioning
Status info Beckhoff
P24Vxxxx UPS
Beckhoff 24V
UPS con-
nected to
CP903x ISA or
PCI card
APC Back-UPS
Pro 280
APC Smart-
UPS 420
Description
dwChargeFlag
s
• No
battery
(bit 7 set)
only with
UPS
software
version
>=2.0.0.6
and UPS
firmware
>= 25.1.I
The
battery
existence
is
checked
every
minute.
• UPS fan
error (bit
8 set) only
with UPS
software
version
>=2.0.0.7
and UPS
firmware
>=40.1.I
The fan
status is
checked
every
minute.
New
(second)
UPS
hardware
revision
required!
• Battery
replace
service
intervall
has
expired
(bit 10 is
set).
Implement
ed in UPS
Software
version >=
3.0.0.8;
• High (bit
0 set) if
battery full
loaded.
• Charging
(bit 3 set)
• No
battery
(bit 7 set)
if no
battery
found.
None None Battery charge
status flags.
*) Only available if model "Smart Signaling to any APC UPS & TwinCAT" configured!
CX2100-09x472 Version: 1.3