Appendix
CX9000 / CX901048 Version: 2.6
It is a good idea to choose "\Temp" or "\Public" as target directory, though this range is mapped into the RAM
regions instead of the hard disc located in flash memory. For operation the system must be rebooted. Just
follow the instructions on the screen. After restart of the CX90x0 the program can be copied easily to the
CX90x0 with the explorer:
If there is enough free space on the CX90x0 (big memory) the image can be copied together with to tool.
Otherwise the image file can be accessed via network drive. In this case you should map the drive to the
CX90x0:
To Next Page
Loading...
