Beco EFE6030W - Other Information; Maintenance and Cleaning; Technical Data

Air cooler / User Manual
9 / 40 EN
4.1 Mantenance nstructon
The fan requires little maintenance. Do not try to fix it by yourself. Refer it to qualified service
personnel if service is needed.
1. Before cleaning and assembling, fan must be unplugged.
2. To ensure adequate air circulation to the motor, keep vents at the rear of the motor free of dust. Do
not disassemble the fan to remove dust.
3. Please wipe the exterior parts with a soft cloth soaking a mild detergent.
4. Do not use any abrasive detergent or solvents to avoid scratching the surface. Do not use any of the
following as a cleaner: gasoline, thinner.
5. Do not allow water or any other liquid into the motor housing or interior parts.
4.2 Cleanng
1. Be sure to unplug from the electrical supply source before cleaning.
2. Plastic parts should be cleaned with a soft cloth moisten with mild soap. Thoroughly remove soap
film with dry cloth.
4.3 Techncal data
Power supply: 220V-240V, 50Hz
Technical and design modifications reserved.
Informaton
Description Symbol Value Unit
Maximum fan flow rate F 5.6 m
3
/min
Fan power input P 65 W
Service value SV 0.09 (m
3
/min)/W
Standby power consumption P
SB
0.5 W
Fan sound power level L
WA
65 dB(A)
Maximum air velocity C 8 meters/sec
Measurement standard for service value ISO 5801:1997
Contact details for obtaining more
information
Arcelik: Arcelik A.S. Sutluce, Karaagac Cd. 2, 34445
Beyoglu Istanbul Turkey
4 Other