What to do if my Bedford Controller is full-frequency running?
If your Bedford Controller is running at full frequency, it could be due to several reasons. First, check the transducer and wiring to ensure you haven't lost pressure feedback. Second, make sure parameter b05.02 is not set to 1. Finally, ensure that S2-Com is open.
Why does my Bedford Controller display a pressure error?
A pressure error on your Bedford Controller might stem from a few potential issues. It could be due to a detector error, so try using a standard detector. Alternatively, incorrect parameter settings could be the cause; calibrate parameters b01.05, b01.06, b01.08, b01.11, and b01.13. Lastly, avoid using excessively long transducer wires.
How to fix can't sleep error on Bedford Controller?
The 'Can’t Sleep' error on your Bedford Controller can arise from several issues: * Check for outlet pipe leakage and consider adjusting parameter b04.04. * Inspect for check valve leakage. * Assess if the pressure tank is damaged and replace if needed. * Address high environment EMI by using shielded wires for the transducer, connecting the shielded layer to PE. * Ensure parameter b04.00 is set to 1.
Detailed list of input/output, function, and control features of the W713B controller.
Detailed explanation of control circuit terminal functions and connections.
Explanation of the function and layout of the W713B controller's keypad buttons.
Troubleshooting common system running faults and their causes.
Faults related to water supply operation and their solutions.
Faults specific to the controller's operation and troubleshooting steps.
General| Brand | Bedford |
|---|---|
| Model | W713B-4010 |
| Category | Controller |
| Language | English |
To Next Page
