What to do if my Bedford W713B-4015 Controller is full-frequency running?
If your Bedford Controller is running at full frequency, it could be due to several reasons. First, check the transducer and wiring to ensure you haven't lost pressure feedback. Second, make sure parameter b05.02 is not set to 1. Finally, ensure that S2-Com is open.
Why does my Bedford Controller display a pressure error?
A pressure error on your Bedford Controller might stem from a few potential issues. It could be due to a detector error, so try using a standard detector. Alternatively, incorrect parameter settings could be the cause; calibrate parameters b01.05, b01.06, b01.08, b01.11, and b01.13. Lastly, avoid using excessively long transducer wires.
How to fix can't sleep error on Bedford Controller?
The 'Can’t Sleep' error on your Bedford Controller can arise from several issues: * Check for outlet pipe leakage and consider adjusting parameter b04.04. * Inspect for check valve leakage. * Assess if the pressure tank is damaged and replace if needed. * Address high environment EMI by using shielded wires for the transducer, connecting the shielded layer to PE. * Ensure parameter b04.00 is set to 1.
Describes the terminals and function for the main circuit connections.
Details the wiring for control circuits, including analog and digital inputs.
Guides on applying the controller for constant pressure water supply systems.
Provides guidance for constant differential pressure water supply applications.
Lists common system running faults and their solutions.
Details faults related to water supply operation and troubleshooting steps.
Addresses faults specific to the controller's operation and their resolutions.
General| Brand | Bedford |
|---|---|
| Model | W713B-4015 |
| Category | Controller |
| Language | English |
To Next Page
