BEEBEST LITO - Connecting Headset

Functions
Connecting Headset
1. Bluetooth Headset
Bluetooth headset By BEEBEST app: Use the "Bluetooth
Connection Assistant" feature to connect to Bluetooth headset.
By LITO function button: when your walkie-talkie is on, press and
hold the function button to turn on the Bluetooth scanning feature.
The walkie-talkie will then scan and automatically connect to the
nearby Bluetooth headset that is awaiting connection with the
strongest signal.
Note:
After connecting to the Bluetooth headset, you still need to
press and hold the PTT button on the walkie-talkie while talking;
if there is a microphone on your headset, you need talk into the
microphone.
If BEEBEST 1S earphone connected, you could press the PTT
button of the earphone while talking.
2. Line-in earphone
BEEBEST LITO is compatible with the mainstream of 3.5 mm line-in
earphone in the market, however, you still need to press the PTT
button on the walkie-talkie to send voice messages.
Note:
If there is a microphone on your line-in earphone, you need talk
into the microphone.
With the VOX feature enabled, the walkie-talkie will send voice
messages automatically (without pressing the PTT button) if
the volume of the speaker’s voice reaches the trigger volume
level.
If BEEBEST H1 line-in earphone connected, you could press the
PTT button of the earphone while talking.