Beeper RE004i - Sensor Range and Scope Adjustment; Sensor Scope

22
INSTALLATION MANUAL
Sensor range adjustment
1 • Sensor scope
FIG 1 • The scope of the parking sensor RE004i is factory set. You can modify this field through this potentiometer on the front of the plant.
CAUTION : Setting this field of action is sensitive, you should only do this if you want to fully optimize the performance of your reversing radar.
FIG 1
MEDIUM
adjustment
Potentiometer in
the middle
Sensor scope
Ultrasonic
sensor
MINIMUM
adjustment
Potentiometer
low (turn left)
MAXIMUM
adjustment
Potentiometer
Hi (turn right)