To Next PageTo Next Page
Need help?Do you have a question about the Beeper RE004i and is the answer not in the manual?
General| Brand | Beeper |
|---|---|
| Model | RE004i |
| Category | Automobile Accessories |
| Language | English |
Accurately determine sensor position before drilling. Height should be 50-80 cm above floor. Ensure parallel signal propagation.
Set sensor with support without glue for range check. Position bracket horizontally, clean, degrease, insert sensor clips, paste firmly.
Factory set scope can be modified via potentiometer. Adjust for optimal performance of reversing radar.
System is compatible with tow balls or spare wheels. Adjust radar level for specific conditions.
Upon engaging reverse gear, the reversing radar activates. The buzzer sounds to indicate reverse passage.
Detection range starts at 150 cm, with progressive beeps from 150 to 30 cm. Continuous beep at 30 cm.
