Enter the telephone number that you want to dial (if any mistake is committed
during entering the telephone number, it can be corrected by using “BACK” key).
The telephone number which has to be dialled out is displayed on the LCD display.
Lift the handset or press Speaker key or press “MENU” key and select the option
“Call”. Press “MENU” key again, the displayed number will be dialled out
automatically.
When conversation is finished, put the handset on the base unit or press the
Speaker key to end the call.
Last Number Redial
You can redial the last dialled number.
Lift the handset or press Speaker key.
Hear the dial tone, press the “RD” key.
The last dialled number will be dialled out automatically.
Mute a call
During conversation, press “LEFT SOFT KEY” and select the option “Mute”.
Press “LEFT SOFT KEY” to mute the call. When the call is muted, “Mute” icon
( ) will be displayed on the LCD.
To unmute the call, during conversation, press “LEFT SOFT KEY” and select the
option “Unmute”, “Mute” icon ( ) will be removed from the LCD display.
Note:
Only transmit/sending is muted while using Mute function.
Call Waiting
During call waiting service when you are on a call and a new call comes, you will
hear a beep tone.
The caller ID information of the third party is also displayed on the LCD along with
beep tone.
Press “LEFT SOFT KEY” to answer the third party call and select the option to put
put the current call on hold.
Press “LEFT SOFT KEY” and select the option “Swap”.
Press the “LEFT SOFT KEY” again to call the current party in conversation and
put the third party on hold. In this way you can alternate the call between current
party and third party whenever it is required.
Note:
This feature is related to service provider. Please activate the same from the call waiting
option in Menu setting.
11
To Next Page
Loading...