PHONE OPERATION
Switch the phone on/off
If your phone is powered off before, press and hold “POWER ON/OFF KEY” to turn
on the phone.
You can press and hold “POWER ON/OFF KEY” again to power off the phone.
Making a call
Pick-up the Handset or press the Speaker key and listen for dial tone.
Dial the number you want to call, LCD will display the dialled number. The input
number will be dialled out automatically.
OR
Make sure the phone is off (not in talk mode).Bring the desired number that you
want to call on the LCD display from Phonebook, Missed calls, Dialled calls and
Received call list, press “MENU” key and select the option “Dial”. The number
displayed on the LCD will be dialled out automatically.
When conversation is finished, put the handset on the base unit or press the
Speaker key to end the call.
Receiving a call
When somebody calls you the phone rings and the Caller ID number shall be
displayed on the LCD display.
Pick up the Handset or press the Speaker key to receive the call.
When conversation is finished, put the handset on the base unit or press the
Speaker key to end the call.
Note:
Default receive volume in handset mode is at level 5.
Default receive volume in speaker mode is at level 5.
Adjust the receive volume in handset or speaker mode by pressing the LEFT/RIGHT key
during the conversation.
Press “Speaker” key to alternate between speaker phone and normal handset mode.
During making or receiving a call, the built in call timer will automatically display the call
time. It is shown in Hour, Minutes and Seconds formal (HH:MM:SS). The call timer gives
you approximate idea about the call length.
If you do not want to attend the received call, press the “RIGHT SOFT KEY” twice, phone
busy message will go to other party end.
Pre-dialling
Make sure the phone is off (not in talk mode).
To Next Page
Loading...