Press the “LEFT SOFT KEY” again to save the setting.
Family number (Direct Memory settings at M1, M2, M3 & M4)
In standby mode, press “LEFT SOFT KEY” to enter in the main menu.
Press “LEFT/RIGHT” key to select the option “Settings” from the main menu.
Press the “LEFT SOFT KEY” & “UP/DOWN” key to select the option “Call
settings” from sub menu.
Press the “LEFT SOFT KEY” again and select the option “General Settings”.
Press the “LEFT SOFT KEY” & “UP/DOWN” key to select the option “Family
number” from sub menu.
Press the “LEFT SOFT KEY” & “LEFT/RIGHT” key to select the memory
location (Family1-Family4) for storing the direct memory number.
Press the “LEFT SOFT KEY” and choose the option “Select” from sub menu.
Press the “LEFT SOFT KEY” and select the desired phonebook entry to be
stored as speed dial number at the selected direct memory (M1-M4).
Press the “LEFT SOFT KEY” again to save the desired phonebook entry at direct
memory location (M1-M4).
Press the “LEFT SOFT KEY” & “LEFT/RIGHT” key to select the memory
location (Family1-Family4) for storing the direct memory number.
Press the “LEFT SOFT KEY” & “UP/DOWN” key to choose the option “Custom
family number”.
Press the “LEFT SOFT KEY”, “Custom family number” appears on the LCD
display. Enter the phone number to be stored as speed dial number at the selected
direct memory (M1-M4). Select “OK” and press the “LEFT SOFT KEY” again to
save the desired phone number at direct memory location (M1-M4). If the desired
phone number to be stored as direct memory number is in the phonebook
memory, the name appears in the Direct Memory/Family number settings
Press the “LEFT SOFT KEY” again and select the option “Call/Delete/Exit” as
desired.
How to use the direct memory number:
In standby mode, press the direct memory location (M1, M2, M3, M4) for more
than 3 seconds.
The relevant phone number stored in that memory location will be dialled out.
You can talk with other end party and hang up the call by pressing the “RIGHT
SOFT KEY”.
37
To Next Page
Loading...