Press the “LEFT SOFT KEY” & “UP/DOWN” key to select the option “Wi-Fi”
from sub menu.
Press the “LEFT SOFT KEY”, “To see available networks, turn Wi-Fi on”
appears on the LCD display with option of On/Off the Wi-Fi setting.
Press the “LEFT SOFT KEY” to “On” the Wi-Fi setting. All the available Wi-Fi
network for selection will be shown on the LCD display. Select the desired network
by pressing the “UP/DOWN” key.
Press the “LEFT SOFT KEY” to select from the available options “Off/Connect
to network/Scan/WPS Push Button/Add network/Advanced” as desired.
Note:
Default “Wi-Fi” setting is at “Off”.
Bluetooth Setting
In standby mode, press “LEFT SOFT KEY” to enter in the main menu.
Press “LEFT/RIGHT” key to select the option “Settings” from the main menu.
Press the “LEFT SOFT KEY” & “UP/DOWN” key to select the option
“Bluetooth” from sub menu.
Press the “LEFT SOFT KEY”, “When Bluetooth is turned on, your device can
communicate with other nearby Bluetooth devices” appears on the LCD
display with option of On/Off the Bluetooth setting.
Press the “LEFT SOFT KEY” to “On” the Bluetooth setting. All the available
Bluetooth devices for selection will be shown on the LCD display. Select the
desired Bluetooth device by pressing the “UP/DOWN” key.
Press the “LEFT SOFT KEY” to select from the available options “Off/Searching
for devices/Rename phone/Visibility timeout/Show received files” as
desired.
Note:
Default “Wi-Fi” setting is at “Off”.
Data usage
In standby mode, press “LEFT SOFT KEY” to enter in the main menu.
Press “LEFT/RIGHT” key to select the option “Settings” from the main menu.
Press the “LEFT SOFT KEY” & “UP/DOWN” key to select the option “Data
usage” from sub menu.
Press the “LEFT SOFT KEY” & “UP/DOWN” key to select from the available
option Service Provider/Wi-Fi from sub menu.
Press the “LEFT SOFT KEY” to see the data usage as desired.
39
To Next Page
Loading...