23.Inspect the entire machine periodically
2
. Look for loose fasteners, worn or broken
parts, and leaky or loose fittings.
24.Pass diagonally through sharp dips and avoid sharp drops to prevent “hanging up”
towing vehicle and mower.
25.Avoid sudden starts and stops while traveling up or downhill.
26.Always cut down slopes; never across the face. Avoid operation on steep slopes.
Slow down on sharp turns and slopes to prevent tipping and/or loss of control.
3.02 - Set Up
Notice to dealer: Pre-delivery setup and service including lubrication is the
responsibility of the authorized dealer. It is up to him to assure that the machine is in
perfect condition and ready to be used. It is his responsibility to ensure that the
customer is aware of all safety aspects and operational procedures for the mower and
the engine. He must also fill out the Pre-Delivery Checklist
3
prior to delivering the
mower.
CAUTION: Stand clear of bands when cutting as they could be under sufficient
tension to cause them to fly loose. Take care in removing bands and wire, they
often have extremely sharp edges and cut very easily.
3.03 - Assembly Instructions
C30-CE5H mowers are shipped almost completely assembled. Follow the instructions
below to assemble remaining items on the mower (see fig. 3).
OPERATION 11 BEFCO
C
YCLONE OPERATOR’S MANUAL
3
See Chapter 7 - Pre-Delivery Checklist.
2
See Chapter 4 - Maintenance.
Fig. 3 - Assembly.
drawbar
hitch bracket
ball joint
pins
hairpin cotter
drawbar attachment bracket
To Next Page
Loading...
