BEFCO CYCLONE - PRE-DELIVERY CHECKLIST

7 - PRE-DELIVERY CHECKLIST
To the dealer: Inspect the machine thoroughly after assembly to assure it is
functioning properly before delivering it to the customer. The following checklist
is a reminder of points to cover. Check off each item as it is found satisfactory or
after proper adjustment is made.
 Engine oil level.
 Gearbox oil level.
 Guards and shield properly fastened.
 Lubrication of grease fittings.
 All hardware properly tightened.
 All decals properly located and readable (see fig. 2).
 Blades properly installed, blade bolts and nuts tightened.
 Overall condition (touch up scratches, clean and polish).
 Test run, check for excessive vibration or overheating of bearings.
 Operator’s Manual.
Review the Operator’s Manual with the customer. Explain the following:
 Warranty.
 Safe operation and service.
 Correct machine installation and operation.
 Daily and periodic lubrication, maintenance and inspections.
 Troubleshooting.
 Operational procedures and storage.
 Parts and service.
 Fill out the Pre-Delivery Checklist and Warranty Registration form.
 Give customer the Operator’s Manual and encourage the customer to read the
manual carefully.
IMPORTANT: Warranty is not valid unless Pre-Delivery Checklist and Warranty
Registration form in Operator’s Manual is completed in detail and mailed to the
Company.
Model Number: __________ Serial Number: __________
Delivery Date: __________ Dealer’s Signature: __________
PRE-DELIVERY CHECKLIST 34 BEFCO
C
YCLONE OPERATOR’S MANUAL