BEFCO DR0-480 - Troubleshooting

6 - TROUBLESHOOTING
WARNING: Be sure tractor engine is off, parking brake is locked, and key is
removed before making any adjustments.
Set front tedder tines so they sit 1”
to 2” above the ground.
Tedder set too low.Forage crop
gets dirty.
Select slower working speed.
Adjust working pattern
13
.
Select slower working speed.
Dense or humid working
conditions.
Incorrect working pattern.
Working speed too high.
Forage crop not
being fluffed
properly.
Adjust timing
12
.Rotor gears out of timing.Tines hitting one
another.
SOLUTIONPOSSIBLE CAUSEPROBLEM
TROUBLESHOOTING 33 BEFCO
R
OTARY TEDDERS OPERATOR’S MANUAL
13
See Section 3.08 - Operating Techniques.
12
See Section 5.01 - Rotor Timing.