There are two safety guards supplied with each machine. Place safety guard so the
large curve is towards the front of the machine and covers the radius of the outer tines.
Attach the safety guards to the support brackets bolted over the side gearboxes using
the supplied bolts and washers (see fig. 10).
3.04 - Pre-Operational Check
IMPORTANT: Check each of the following, carefully, prior to engaging the equipment:
1. The rotor bearings and joints have been greased.
2. The oil in the gearbox.
3. The driveline cross and bearings have been greased.
4. No wrappings or foreign objects are around the tines or rotor flanges.
5. The tines are properly installed, the tine bolts properly torqued
4
and the timing is
correct.
6. All hardware is tight.
7. The tractor, to ensure correct direction of PTO and rpm speed.
8. All safety shields and guards are in place and tightly attached.
9. No people or animals are in the work area.
DANGER: Stay clear of rotating driveline. Entanglement in rotating driveline can
cause serious injury. Disengage PTO, engage parking brake or place
transmission in “Park”, shut off the tractor and remove the key before working
around hitch, attaching or detaching driveline, making adjustments, servicing or
cleaning the machine.
OPERATION 16 BEFCO
R
OTARY TEDDERS OPERATOR’S MANUAL
4
See Table 1, page 30.
Fig. 10 - Safety guards.
safety guard
To Next Page
Loading...