Fundor T
6
The Fundor T is a benchtop machine for casting dental
work. It can be used for precious metal, cobalt-crome
and metal-to-ceramik alloys or no precious metal
content.
The ingots are melted with a flame. We recommend to
use for melting only the Multiplex melting torch for
propane/natural gas/oxygen and for simplifying the
setting of the flame the automatic gas lighter.
Height 260 mm
Height with lid raised 850 mm
Width 770 mm
Depth 650 mm
Weight 45 kg
Rated voltage 200 .... 240 V, 50/60 Hz
Special voltage 100 .... 120 V, 50/60 Hz
Power consumption 600 W
Speed about 500 min
-1
Noise emission < 70 dB (A)
Ambient temperature (max.) 40 °C
Instructions according to the centrifuge regulation (Germany):
Mode of operation S3 10% (intermittent service with
10% continous duty)
Max. centrifuge quantity 1 kg (mould, crucible, alloy)
Kinetic energiy about 300 Nm
Technical data
Unit description
Scope of delivery
Fundor T with double-jointed arm
200 .... 240 V, 50/60 Hz ________ Order-No. 25025
100 .... 120 V, 50/60 Hz ________ Order-No. 25026
with: • 1 pack Auromelt HF melting powder
• 1 pair of safety goggles
• 2 feet accepting screw
• 3 crucibles for precious metal alloys
• 3 crucibles for cobalt-chrome and non-
precious metal alloys
• 2 replacement tension springs for the
centrifugal arm
• 2 replacement fuses 4 amp.
• 1 replacement fuses 0,1 amp. (for PCB)
Scope of delivery, Wearing parts and Extras
Wearing parts
• Crucibles for precious metal alloys
(1 pack = 6 pcs) __________ Order-No. 52425
• Crucibles for cobalt-chrome and non-precious
metal alloys (1 pack = 6 pcs) _ Order-No. 52426
• Tension spring for centrifugal arm
1 pcs ___________________ Order-No. 34924
Extras
• Multiplex Microflame soldering and melting torch
for natural-gas/oxygen or propane/oxygen
______________________ Order-No. 25385
• Automatic gas lighter ________ Order-No. 34958
Centrifuging is started by closing the lid. The double-
jointed arm optimises the centrifugal force. The
starting speed is infinitely variable.
To Next Page
Loading...
