What to do if my Bego Dental equipment shows E002 error?
If the Bego Dental equipment displays error code E002, it indicates there is no compressed air. Make sure that the compressed air supply is at least 5 bar (100 l/min) or switch off any other devices using compressed air. If needed, install a compressed air reservoir. Also, clean the seals.
What to do if my Bego Nautilus CC plus Dental equipment shows E001 error?
If the Bego Dental equipment displays error code E001, it means there is no water. You should add water.
Why vacuum and/or compressed air are not working in my Bego Nautilus CC plus Dental equipment?
If the Bego Dental equipment is not working with vacuum and/or compressed air, the air filter might be dirty. Replace the air filter.
What to do if my Bego Nautilus CC plus shows E003 error?
If the Bego Dental equipment displays error code E003, it means the lock is not activated. Ensure that the doors are closed properly.
Why is there a hissing sound during operation of my Bego Nautilus CC plus Dental equipment?
If you hear a hissing sound during the operation of your Bego Dental equipment, the sealing surfaces on the crucible and/or mold door may be dirty. Remember that the parts are very hot! Clean the seals and sealing surfaces.
How to troubleshoot a blank display on my Bego Nautilus CC plus Dental equipment when the main switch is on?
If the main switch of your Bego Dental equipment is on, but the display is blank, the device might not be getting power. Check the power supply connection and the fuses.
General| Brand | Bego |
|---|---|
| Model | Nautilus CC plus |
| Category | Dental equipment |
| Language | English |
To Next Page
