Operation
Switching on
1. Open compressed air supply.
2. Switch on machine.
The machine runs through initialisation of the
measuring system. After 2 - 3 minutes (cold
machine) the unit is ready for operation.
3. Wait until the language selection is displayed.
4. The language can be selected by pressing on
the flags.
After selecting the language, press the display
where the next text will be displayed.
5. Select the required action by pressing (long
enough).
Only touch the touchscreen with the
fingertips! Do not use pens or finger-
nails!
Any liquid that leaks as a result of
damage is toxic and corrosive! Avoid
contact with the skin, swallowing or
breathing in!
To Next Page
Loading...
