Need help?Do you have a question about the Behringer ADA8200 and is the answer not in the manual?
General| ADAT I/O | Yes |
|---|---|
| Sample Rate | 44.1 kHz, 48 kHz |
| Resolution | 24-bit |
| Power Supply | Standard IEC AC cable |
| Digital Inputs | 1 x ADAT |
| Digital Outputs | 1 x ADAT |
| Word Clock | No |
| Form Factor | 1U Rackmount |
| Inputs | 8 x XLR/TRS combo jacks |
| Phantom Power | Yes, +48V |
| Dimensions | 44.5 mm x 482.6 mm x 217 mm / 1.75 in x 19 in x 8.5 in (1U) |
| Frequency Response | 20 Hz - 20 kHz |
| Type | 8-channel A/D and D/A converter |
Essential safety guidelines for operating the device, including electrical shock and fire prevention.
Statement regarding technical specifications, trademarks, and liability limitations.
Information on applicable warranty terms and conditions for MUSIC Group products.
Connect audio sources, ADAT devices, and set up word clock for initial system configuration.
Detailed explanation of front and rear panel controls, including LEDs, buttons, and connectors.
Instructions for connecting audio sources, ADAT, and configuring word clock settings.
Detailed technical data for microphone inputs, line I/O, digital I/O, synchronization, power, and dimensions.
Guidance on registering your product and procedures for handling malfunctions or seeking support.
Details regarding the device's compliance with FCC rules and potential interference.
To Next Page
