Behringer U-PHONO UFO202 User Manual

User Manual
U-PHONO UFO202
Audiophile USB/Audio Interface with Built-in Phono Preamp
for Digitalizing Your Tapes and Vinyl Records

Behringer U-PHONO UFO202 Specifications

Power

usb connection voltage	5 V
usb connection current	100 mA
output impedance	50 Ω

Audio Specifications

max input level	2 dBV
max output level	-2 dBu, 2 x 3.7 mW @ 100 Ω
frequency response	20 Hz to 20 kHz, ± 1 dB @ 44.1 kHz

Weight and Dimensions

dimensions	22 x 88 x 60 mm, 0.87 x 3.46 x 2.36 inches
weight	0.10 kg

Summary

Thank you

Important Safety Instructions

LEGAL DISCLAIMER

LIMITED WARRANTY

§1 Warranty

Details the validity and conditions of the limited warranty for the product.

§2 Online registration

§3 Return materials authorization

§4 Warranty Exclusions

§5 Warranty transferability

§6 Claim for damage

§7 Limitation of liability

§8 Other warranty rights and national law

§9 Amendment

1. Before You Get Started

1.1 Shipment

Instructions for inspecting and handling the product upon delivery.

1.2 Initial operation

Guidance on proper placement and ventilation for the device.

1.3 Online registration

Steps and importance of registering your BEHRINGER equipment online.

2. System Requirements

3. Operating Elements and Connections

L and R RCA Outputs

Connect to external monitoring devices like speakers or headphones.

L and R RCA Inputs

Connect audio sources such as record or tape players.

Ground Connection

Connect turntable ground cable to reduce noise and hum.

4. Software Installation

5. Hookup Diagram

5.1 Hooking up a record player

Detailed steps for connecting a turntable, including LINE/PHONO switch settings.

5.2 Hooking up a tape player

6. Recording Process

7. Audio Connections

7.1 Wiring

Guidance on using RCA and adapter cables for audio connections.

7.2 Headphones connection

8. Specifications

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION